Animation

What Does an MOA Animation Cost?

Most MOA animations run $25,000 to $45,000. What moves that number, what to ask about any quote, and what to have ready before you scope one.

Sep 7, 20268 min readBy Vuelab

Most of the mechanism of action animations Vuelab produces run between 90 seconds and two minutes and land between $25,000 and $45,000, depending on complexity. That’s the honest range. The honest caveat is that no one can tell you where your project sits inside it until there’s a storyboard, and anyone who quotes you a firm number on a first call is guessing.

That leaves a marketing lead scoping their first MOA animation in an uncomfortable spot. Almost nobody in this category publishes prices, so you arrive with no reference point and anchor on whichever quote lands first. This article won’t give you a number for your project. It gives you something more useful: a way to read the quotes you get, so you can tell an expensive one from a thorough one.

Why almost nobody publishes a price

Two reasons, and only one of them is good.

The good reason is that scope varies more in medical animation than in most creative work. A 30-second sizzle piece of a new device spinning under studio lighting, with a few cutaway shots, is a different project from a surgical animation showing how that device is implanted and what happens in the tissue once it’s there. Both are called "an animation." One can cost several times the other. A single published number would mislead everyone who read it.

The less good reason is that opacity is convenient. If no one knows what the work should cost, the studio never has to defend its price.

The silence has a cost, and the buyer pays it. Without a reference point, a low quote looks like a good deal and a high quote looks like padding, when the difference is usually what has been left out of the low one.

Vuelab’s position is in between. We publish what we can stand behind: a fixed development fee and a production range. We don’t publish a finished-film price, because until the storyboard exists, neither we nor the client knows what’s being built. Most clients come in with a clear idea of what they need and find out what they actually need when they see it drawn.

Cost tracks what gets built, not how long it runs

Runtime is the first question buyers ask. It’s a fair question, and it matters. It’s just not the one that moves the number most.

A 60-second MOA animation of a novel biologic, where the mechanism has never been visualized and every cell and protein has to be modeled from research, can cost more than a three-minute rep training piece assembled from a device library that already exists. The first is built from nothing. The second is built from parts.

So when you read a quote, look past the runtime line. Look for what the studio believes it has to create.

The four variables that actually move a quote

Scientific complexity. This is the hard part, and the biggest cost variable. It means how much has to be understood, built and validated from nothing. If the science isn’t right at the start of the project, everything downstream is rework. Vuelab’s process puts everyone who knows the product in one working session at the beginning: the research team, the sales team, the founders. They walk us through the anatomy and the mechanism while we work live in Figma, capturing and sketching, until we can draw what happens by hand. If we can’t sketch it, we can’t animate it. A quote that doesn’t budget for that session has priced the animation and skipped the science.

Degree of realism. Photoreal tissue and a stylized schematic are different disciplines, not different settings. A more illustrative, animated feel is faster to produce. A photorealistic treatment means a more intense lighting and texturing setup, and that is time. Which one you need depends on the audience and on taste, and it’s a real decision, not a default. Buyers often ask for photoreal because it sounds like more. Sometimes the clearer film is the simpler one.

Approval stakeholders. Clinical, regulatory and marketing each have a say. Whether that adds cost depends entirely on when they’re brought in. If you animate the whole film and then wait for a final stakeholder to sign off, you’ve set yourself up for a rebuild. Vuelab requires that every stakeholder who has to approve is involved through the process, not necessarily at every step, but at the key moments: a critical anatomical beat, a clinical claim, the storyboard before production starts. A quote that doesn’t ask who signs off, and in what order, hasn’t priced the revisions that question would have prevented.

What already exists. The single biggest saving is a CAD file. Building a device from scratch takes anywhere from a day to a week depending on its complexity. When the CAD file is provided, that’s thousands to tens of thousands of dollars that never enter the quote. The same logic applies to a rendered device library from a prior piece, an existing script, or a mechanism already documented somewhere. The first MOA animation in a system carries the modeling cost. The fourth reuses it.

What to ask about any quote

Vuelab rarely sees a competing quote. When a prospect goes elsewhere, we hear "the price was better," and that’s usually where the information ends. So this isn’t a critique of anyone in particular. It’s a list of what a low number tends to leave out, and what to ask before you sign.

Where does revision happen? The storyboard is where a film should be argued about, because changes there cost a conversation. Changes after animation has started cost weeks. A quote that budgets little for storyboarding and a lot for post-production revision has the sequence backwards.

Who validates the science? Ask what happens when clinical review flags a frame. If the answer involves re-animating, the science wasn’t settled before production. The failure mode you’re trying to avoid is a finished piece that can’t be corrected without starting over.

What files do you receive? Vuelab delivers full ownership on completion, source files included, once the project is complete and paid for. Not every studio does. Without source files, every future edit goes back to the original vendor at their price.

What formats ship? The current standard is 16:9, 9:16 and 1:1, plus a library of high-resolution stills for sales and marketing use. If the quote covers one master file, every other cut is an add-on you’ll pay for later. A trade show loop and a rep’s iPad are different builds. Ask which ones are in.

What does one film become? This is the question most buyers skip. At $25,000 to $45,000, an MOA animation is a real investment, and the way to justify it isn’t the film. It’s everything the film produces: the stills, the social cuts, the deck loops, the device renders reused across a launch. A studio that can only tell you what the video costs, and not what the library costs, is selling you one asset when you’re buying a system.

What to have ready before you ask for anything

The scoping conversation goes faster, and the quote comes back more accurate, when three things are in hand.

The mechanism, documented at whatever fidelity exists. A research deck, a whitepaper, a napkin sketch from the founder. Anything that shows what happens and where. It doesn’t have to be pretty. It has to be true.

Who signs off, and in what order. Names and roles. Clinical, regulatory, marketing, and the person whose opinion changes things at the end. If that last person exists, say so now.

Where it will be shown. A website hero, a rep’s tablet, a conference screen on loop, a social feed. These are different formats and sometimes different films. The answer changes what gets built.

A script or an outline of one helps too. It won’t lower the price, but it will save time, and time is what a launch date is made of.

The number comes after the storyboard, and that’s the point

Vuelab charges a $3,500 development fee on every animation project, regardless of size. For that, you get the working session, the script, the storyboard and look development frames. You leave with a plan you own, a clear view of what the finished film will be, and a production price that reflects it. If the number doesn’t work, you still have the plan, and you can take it anywhere.

That’s the answer to the title question. An MOA animation costs what it takes to build the thing you actually need, and the only reliable way to find that out is to draw it first.

If you’re scoping your first mechanism of action animation and want a second read on a quote, or you’d rather skip the guessing and start with a storyboard, thirty minutes with our team is the fastest route.

FAQs

Frequently asked questions.

How much does a mechanism of action animation cost?

Most of Vuelab’s MOA animations, running 90 seconds to two minutes, cost between $25,000 and $45,000. The exact figure depends on scientific complexity, the degree of realism, and what assets already exist, and is set after the storyboard. See pricing for details.

Why can’t a studio quote an MOA animation on the first call?

Because the film isn’t defined yet. Until the mechanism is sketched and the storyboard is agreed, neither party knows how much has to be built. Vuelab uses a fixed $3,500 development phase to get there before pricing production.

Does a longer MOA animation always cost more?

No. Runtime matters, but what has to be built matters more. A short film visualizing a novel mechanism from nothing can cost more than a longer one assembled from an existing device library.

Does having CAD files reduce the cost?

Yes. Modeling a device from scratch takes a day to a week depending on complexity. Providing the CAD file removes that from the quote, which for complex devices can mean thousands to tens of thousands of dollars.

What should be included in an MOA animation quote?

The science validation process, the storyboard phase, source files on delivery, and format variants: 16:9, 9:16, 1:1 and a stills library at minimum. Ask specifically about each one.

Who owns the finished MOA animation?

At Vuelab, the client does, including source files, once the project is complete and paid for.

Launching a product?
Let’s make it unmissable.

Give us a few minutes, and we’ll show you how to better visualize your product.